Air Intake Filtration: Cooling Towers Photos

United States and Foreign Patents Granted - These products are protected under one or more of the following U.S. and foreign patents:
5,370,722 • 5,529,593 • 6,197,077 B1 • 2170244 • 95904185.6-2113 • 7,323,028 Other Patents Pending.

Cooling Towers
No business today can afford the cost associated with unscheduled downtime due to system fouling or clogging. Air Intake Filters help to keep debris from getting into fill material, thus helping to optimize the thermal transfer process, also helping to maintain good water ecology. The following photos represent a small sampling of the variety of cooling towers Air Intake Filters are used on. Air Intake Filters are a strategic element in a well managed cooling tower maintenance program.

Cooling Tower with Stud Adapter Fastening Systewm

Pulley Mount Filter on In-ground CM Cooling Tower

Marley NC8310 cooling tower with Industrial Grade Air Intake Filer

Industrial Grade Air Antake Filter With Stud Adapter Fastening System

Marley Cooling Towers for process cooling application (Medical Device Production)

Stud Adapter Filters on BAC model CFT2-2422 Cooling Tower

Stud Adapter attached to a BAC Cooling Tower

Pulley Mount Air Intake Filter on Marley Cooling Tower

Stud Adapter Filter on Marley Cooling Tower

Pulley Mount Filter on Marley Cooling Tower with common concrete basin

Pulley Mount Air Intake Filter on a two cell BAC cooling tower

Stud Adapter Filter on Custom Concrete Cooling Tower with Vertical airflow

Stud Adapter Filter on Custom Concrete Cooling Tower

Stud Adapter Filter Produced to cover vertical airflow intake opening and fit around large water pipe

Pulley Mount Filters on Evapco Cooling Tower

Stud Adapter Filters on a Two cell Marley NC 8307 cooling tower

Two Cell BAC Cooling Tower with Stud Adapter Filter

Two Marley Aqua-flow Cooling Towers with Stud Adapter Filter Protection.

Hospital Environmental Air Application / Stud Adapter Filter

Filters are easily cleaned using broom, brush or shop vacuum.

Cleaning Intake Filters is quick and easy. simply use a broom, brush or shop vacuum. Pictures shows a weeks worth of debris captured by stud adapter filters.

Environmental Cooling Application / Stud Adapter Filter on BAC VX1-70-1 cooling tower

Environmental Cooling Applications - Stud Adapter Filter on Epac Unit

Process Cooling Application / Stud Adapter Filter on BAC Cooling Tower

Stud Adapter Filter on a 2-Cell Marley Primus Cooling Tower

In-ground tower with stud adapter filter

Stud Adapter Filter on custom in-ground cooling tower, Hospital Environmental Cooling Application

Hospital Cooling Tower For Environmental Cooling - Stud Adapter Filters shown protecting a three cell System consisting of a BAC 1-3300 and BAC3990-2 cooling tower

Automotive Process Cooling Tower - BAC Cooling Tower

University Environmental Cooling Application - Stud Adapter Filter Protecting a BAC VX1-70-2 system

Marley multi-cell cooling tower with pulley-mount Filter (Note debris load - This customer removes the debris using a long handled shop vacuum)

Evapco Cooling Tower. This tower was equipped with stud adapter filters on all sides.

Four Cell Cooling tower with pulley-mount system with vinyl cover.

Two Cell Process Cooling Tower with Pulley-Mount Filter

Mounting storage unit on pulley mount filter system

Marley Quadraflow Cooling Tower with 4 Pulley - Mount Air Intake Filters

BAC Cooling Tower with Pulley Mount Filters (Process Cooling Application)

BAC Model 3752A-2 Cooling Tower - Automotive Powerhouse Application

Stud Adapter Filter on Marley NC 222 Cooling Towers Used To Support Production

Stud Adapter Air Intake Filter On A BAC Model JO905 Cooling Tower

Pulley Mount Air Intake Filter on a Marley Cooling Tower

Cooling towers with in-ground concrete water basin.

Newly installed Air Intake Filter on a dry cooling tower.

This two (2) cell cooling tower shows filters in an up position. Note the galvinized storage container below filter.

Multicelled tower with individual pulley mount filters

This Cooling Tower has has four (4) Air Intake Filters with storage containers.

This is a three (3) cell cooling tower with air intake openings each measuring 12' wide by 20' high.

It takes one person about 15 minutes to lower and store these filters.

This is a four (4) sided air intake cooling tower with each opening 14' wide by 9' high. All filters are pulley mount construction with galvinized storage containers.

This cooling tower sits on a concrete base with our Air Intake Filtering System providing protection from animals, leaves, birds, paper, insects.

Installed in 1996, these filters are in great condition and still in service.

Air Intake Filters keep cooling towers clean so you spend less time maintaining the system.

Installed in 1994, these filters are still in service.

Air Intake Filters are an excellent preventitive upgrade to reconditioned cooling towers.

Air intake filters not only filter the air but keep out small animals and birds on this ground elevation unit.

What Not To Do
Click here to view methods used to attempt solving air intake problems only to increase maintenance cost and impact operational efficiency of the equipment.

Air Handling Units, Penthouse Units, and Intake Hoods