Weather Guards mount over the condenser coils on the prevailing wind side of the unit to block air movement through the coil during low ambient operation. Note, low ambient temperatures will offset the reduction of air movement through the coil.

Compressors require a small amount of heat retention to support the startup process – however, during frigid temperatures, it takes as little as a 5 mph breeze through the coil to dissipate the necessary heat required and when this happens, the compressors will stall leaving process equipment and operations starved for cooling.

Wind Guards are constructed of a heavy duty, fiber reinforced vinyl with outer reinforcement. Includes choice of fasteners: - nylon turn stud or toggle fasteners, Heavy duty Stud Adapters or Self-tapping Screws & Bonded Washers.

Wind Guards Must Be Removed When Ambient Temperatures Rise to a Point where Air Movement through the Coil is required for normal operation - Contact Plant For Minimum Equipment Requirements for Using This Product.