Mounts to your equipment by mounting cable above and below the intake opening; Filters attach to the cable top and bottom using spring hooks. Filter is secured vertically using self-tapping stud adapters that hold filter in position.

During the off-season, filter folds-up and is protected using a vinyl storage cover and is ready to go in the spring.

1. Attach eye-bolts in upper left and right and lower left and right corners.
2. Attach cable to the eye-bolts
3. Fasten filter to the cable using snap hooks
4. Fasten cable support hooks as needed to support cable
5. Secure vertical edges by attaching self-tapping stud adapters.

Note: Roller Hooks and Track also available for higher air intake openings.