United States and Foreign Patents Granted - These products are protected under one or more of the following U.S. and foreign patents: 5,370,722 • 5,529,593 • 6,197,077 B1 • 2170244 • 95904185.6-2113 • 7,323,028 Other Patents Pending.
Are You Serious About Reducing
Your Energy Cost and Increasing
Operational Efficiency?
If You Are, Then It's Important To Do The Things That Are Easy And Will Give You The “Biggest Bang For Your Buck”; Installing Cottonwood Filter Screens Is One Of Those Things - They Will Keep Your Equipment Clean And Running Efficiently So You Can Get Every Ounce Of Energy Savings From It.
That’s Easier Said than Done.
If your Facility is operating with a “Lean” Budget &
Maintenance Staff, It Can Be Difficult and Sometimes
Impossible to Capture All of The Energy Savings Because
You Simply Don’t Have the Money or Hands Available to keep
up with the maintenance that needs to be done.
If This Is Your Situation, Then Using Cottonwood Filter
Screens Will Definitely Help You. After Seeing the Energy
Savings Below, Be sure to visit the section on this site called
“Reducing Maintenance Time”You’ll Be Amazed How
Cottonwood Filter Screens Will Reduce Your Maintenance
Time & Effort!
Important Points to Think About:
Every Day That Your Chiller / Condenser Unit
Operates it takes on debris load and Runs at an
Increasing Level of Inefficiency. That means that
Each Day Following a Coil Cleaning, Your Chiller /
Condenser unit is Costing You More Energy Dollars
than the Day before until the Next Coil Cleaning!
High Efficiency Equipment is only as efficient as the
Coils are Clean. Replacing Old Equipment with
New High Efficiency Equipment doesn’t guarantee
that you’ll reap the Efficiency & Energy Saving
Benefit. “Micro-Coils” typically used in high
efficiency condenser systems Increase the Coil Fin
Density so as to increase the heat rejection surface
area; this reduces the air space between each fin,
making them prone to Rapid Fouling – keeping
them clean is an imperative in order to realize the
efficiency and energy saving benefit.
“Going Green” without “breaking the bank” typically
requires stepping-up maintenance practices on
existing equipment and replacing old equipment
only when it can no longer provide the efficiency
needed even under the best of maintenance
practices.
Energy Saving Calculator
The Following Energy Cost Calculator is designed to Show General Savings at Various
Energy Rates as Applied to Various Tonnage Ratings. Due to many variables affecting
energy costs from region to region, the information from this chart should only be used to get
a directional sense of benefit from operating a clean vs. dirty condenser coil.
Enter the Number of Units Here
Be sure to count only those of the same tonnage ratings - don't combine units of different tonnage
